Device Setup Instructions

Step 1

Open your phone’s settings

At the top, find and tap the 'Connected devices' section

Step 2

Find and open the private DNS settings

Step 3

Configure your phone to use dns.adnull.com

In the popup window, select the provider hostname option for the private DNS server — indicator 1

A text field will appear below — enter 'dns.adnull.com' there — indicator 2

Save the settings — indicator 3

Step 1

Open your phone’s settings

At the top, find and tap the 'Connected devices' section

Step 1

Open your computer’s settings

To do this, click the 'Start' menu

Step 1

Open the general Wi - Fi settings

In the upper-right corner of the screen, find and click the Wi - Fi icon — indicator 1

A menu will appear; at the bottom, click Wi - Fi settings — indicator 2

Step 2

Open the settings of the desired Wi - Fi connection

Open the settings of the connected Wi - Fi access point by tapping 'Details' — indicator 1, or click ... next to the network you want to edit and select 'Details' from the dropdown — indicator 2

Step 3

Configure Wi - Fi to use dns.adnull.com

On the left in the popup window, find and click DNS — indicator 1. You will see the current list of DNS servers — indicator 2

Use the '-' button to delete unnecessary entries — indicator 3

Click the '+' button and enter the IP address of the AdNull DNS server:188.190.191.78 — indicator 1. Click 'OK' to save the settings — indicator 2

Step 1

Open the general network settings

In the lower-right corner of the screen, find and click the Wi - Fi or wired connection icon — indicator 1

Step 2

Configure the use of the AdNull DNS server

Make sure the correct connection is selected — indicator 1. Select the IPv4 tab — indicator 2

In the dropdown menu, choose the value shown in the picture — indicator 3. Enter the IP address of the AdNull DNS server:188.190.191.78 — indicator 4, then click 'Apply' — indicator 5.

Step 3

Restart the network

In some cases, you may need to reconnect the network. To do this, click 'Disconnect' — indicator 1. After that, the system will automatically reconnect using your updated settings.

Step 1

Open the web interface of your router D-Link DIR-825

Usually it's one of the following links: http://192.168.0.1 , http://192.168.1.1 and enter your username and password

Step 2

Configure the use of the AdNull DNS server

In the top menu, select 'Settings' — indicator 1 → 'Internet' — indicator 2 → DNS — indicator 3
Edit the IPv4 value as follows:188.190.191.78 — indicator 4, then click 'Apply' — indicator 5

Step 1

Open the web interface of your router Mercusys ME80X

Usually it's one of the following links: http://192.168.0.1 , http://192.168.1.1 and enter your username and password

Step 2

Method 1. Changing the network settings

Click 'Settings' — indicator 1 → 'Network' — indicator 2 → 'Specify IP addresses' — indicator 3

Edit the 'Primary DNS' field as follows:188.190.191.78— indicator 4

Click the 'Save' button — indicator 5

Step 3

Method 2. Configuring the local DHCP server

Click 'Settings' — indicator 1 → 'Network' — indicator 2 → 'Primary DNS' — indicator 3

Edit the 'Primary DNS' field as follows:188.190.191.78

Click the 'Save' button — indicator 4

Step 1

Open the web interface of your router Mercusys MW301R

Usually it's one of the following links: http://192.168.0.1 , http://192.168.1.1 and enter your username and password

Step 2

Local DHCP server setup

Click 'Advanced' — indicator 1 → 'WAN Settings' — indicator 2 → 'Specify DNS manually' — indicator 3

Edit the 'Primary DNS' field — indicator 4 — as follows:188.190.191.78

Click 'Save' — indicator 5

Step 1

Open the web interface of your router Tenda AC19

Usually it's one of the following links: http://192.168.0.1 , http://192.168.1.1 and enter your username and password

Step 2

Change the network settings

Click 'Internet Settings' — indicator 1 → Change 'DNS Settings' to 'Manual' — indicator 2

Set the value of the 'Primary DNS' field — indicator 3: 188.190.191.78

Click the 'Connect' button — indicator 4